INDUSTRIAL PRODUCTS & LUBRICANTS

To view SDS in Adobe PDF format, you need to have the free Adobe Reader installed on your computer.

0-101
GSA ITEM View SDS
ACC ACID
COIL CLEANER
Phosphoric Acid

ACC Coil Cleaner is designed for air conditioner and refrigeration coil. This phosphoric acid based cleaner removes dust, dirt, grime and grease from aluminum or copper coils and fins of cooling units and air conditioners. When used regularly, it keeps coils clean to promote more efficient operation and lowers the power consumption of air conditioner and refrigeration units.

Cs 4 Cs 8 Pl 5
Dr 20 Dr 35 Dr 55

1-L103 View
                  SDS

BIG RED

BIG RED is a multi-purpose, red, non-melt grease for automotive, marine, industrial and agricultural applications. Extreme pressure additives give excellent resistance to shock and impact. Forms a protective film to guard against rust and corrosion. Provides added lubrication in applications where metal meets metal. Resists chemical breakdown from acids, salt water, dust and dirt. Will not liquefy at high temperatures like soap based greases and remains pumpable at low temperatures.

Cs 24 Cs 48 14.5 Oz Tubes
45# 120# 400#

0-901 View
               SDS
BOILER
COMPLETE
TREAT H

This liquid additive features a multifunctional formula with alkalinity builders, oxygen scavengers, sludge dispersants and corrosion inhibitors to offer superior water treatment. It was designed for use in hard water systems and can be used with an automated continuous feed system. It also travels along with the stream with the system to protect steam and condensate plumbing and it operating in top condition.

Ctn 4 Cs 8
Pl 5 Dr 20 Dr 55

0-1960 View
                  SDS
BOILER
COMPLETE
TREAT S

This all in one liquid soft water boiler treatment features a multifunctional formula with the entire necessary chemical for complete treatment in one convenient liquid. It combines hardness control with oxygen scavengers and a volatile amine corrosion inhibitor that travels along with the steam to protect both the steam and condensate plumbing. It can be used with an automated continuous feed system, and is safe to use with other boiler chemicals.

Ctn 4 Cs 8
Pl 5 Dr 20 Dr 55

0-903 View
               SDS
BOILER
TREAT H

This liquid additive was designed to prevent the deposition of lime, scale, rust and other minerals in large water-treatment boilers. It was designed for use in hard water systems, or mixed with other boiler treatment chemicals on a weekly maintenance schedule.

Ctn 4 Cs 8
Pl 5 Dr 20 Dr 55

0-1958 View
                  SDS
BOILER
TREAT S

This liquid steam boiler additive is a phosphate-based cycle treatment fortified with a proven polymeric scale inhibitor. It was designed for use in soft water environments and can be used with an automated continuous feed system. It is safe to use with other boiler treatment chemicals, especially steam line treatments and oxygen scavengers.

Ctn 4 Cs 8
Pl 5 Dr 20 Dr 55

1-532
formerly
0-T22718 View SDS
CA SUPER
ELECTRA PEN

CA SUPER ELECTRA PEN is a fast acting PENETRANT that quickly cuts through dirt, rust and scale to creep into parts which have become frozen by or encrusted with corrosion and oxidation. Provides a long-lasting LUBRICANT which loosens dirt, rust and other corrosive elements. Reduces friction and will not become dry, brittle or hard. Prevents surface deterioration by acting as a DEMOISTURANT, which, with its unique molecular film, seals out water on all treated surfaces. A true multi-purpose spray that provides a shield-like film against the harmful effects of moisture and corrosion.

Dz Cs 24

1-514
GSA ITEM
View SDS
UNPLUG 
Circuit Board
Cleaner
(Not Available In CA)

UNPLUG has a fast evaporation rate and is residue free. The dielectric rating is to 25,000 volts and is ozone safe and has no CFCs or HCFCs. UNPLUG is safe to use on plastics, rubber and metal. Use to remove dirt, oil, and grime from circuit boards, computers, magnetic tapes, printed circuits, gauges, switches and relays.

Dz Cs 24

1-581 View
                SDS

CLEAR LUBE II

CLEARLUBE II is a non-staining clear Teflon® lubricant designed to penetrate tight tolerances and form a tenacious lubricating film. CLEARLUBE II withstands high temperatures and resists water washout. It is a super extreme pressure lubricant and is a non-washout. It is dispensed like a penetrant that gets into hard to reach areas and sets up within minutes to a heavy duty grease for long lasting lubrication.

Dz Cs 24

1-538 View
               SDS

SLIDE OUT

SLIDE OUT Dry Silicone Spray is a Food Grade lubricant designed to lubricate equipment. SLIDE OUT leaves a non-staining, dry, pure silicone film to lubricate moving parts, reducing friction and wear. SLIDE OUT is heat stable from -450°F to 450°F. It’s formulated as a release agent on seals and gaskets of tank closures. SLIDE OUT lubricates all sliding surfaces except those you wish to paint. Excellent on RV slide outs. Use on sticking metal, wood, rubber and plastic. Apply to cutting tables, conveyors, heat sealing equipment and slicing equipment. Waterproofs leather, canvas, rubber and chrome surfaces. It’s safe on all plastics and contains no Methylene chloride. SLIDE OUT won't melt, freeze, gum or become rancid.

Dz Cs 24

1-537 View
               SDS
E-Z GLIDE
Spray Silicone

E-Z GLIDE is a USDA authorized multi-purpose silicone spray lubricant. The no-flammable formula is safe to use in most plant areas. E-Z GLIDE uses a high viscosity silicone for extremely long lasting lubrication and protection. E-Z GLIDE is NON-CONDUCTIVE to 28,000 volts. E-ZGLIDE is stable at temperatures up to 400 F.

Dz Cs 24

1-577 View
                SDS
E-Z LUBE WHITE FOOD GRADE
GREASE

E-Z LUBE has the highest recommendation for a lubricant with food contact. A high viscosity, high temperature grease specially formulate for the food packaging and pharmaceutical industries. E-Z LUBE protects equipment against rust, oxidation and wear. Resists throw-off, shear breakdown and water and detergent wash out.

Dz Cs 24

1-542 View
              SDS

GEAR LUBE EF

GEAR LUBE is a tar base lubricant. This thick tacky fluid stays on the gear where it is needed, has a high temperature stability to 175o F plus. Special formula allows material to stretch, insuring contact with all gear surfaces.

Dz Cs 24

1-666 View
              SDS
ICE MACHINE CLEANER

ICE MACHINE CLEANER removes lime scale from ice making equipment quickly. Works safely on stainless steel, contains NO chlorine or chlorides and does not give off harsh fumes. Authorized for use by the USDA in federally inspected meat and poultry plants. Ice Machine cleaner improves ice capacity and quality by removing built-up scale that causes ice to stick to mechanisms and can cause jamming. Works great on ice making equipment, coffee brewers and humidifiers.

Dz Cs 24

0-303 View
               SDS
KOOL
Metal Working
Coolant and Lube

KOOL is a water-dilutable coolant and lube it is designed for use with all ferrous and non-ferrous metals in cutting, grinding, turning and other machining operations. When diluted, it makes a clear solution to give the operator an unobstructed view of the work piece. Its synthetic formula does not contain silicone or sulfur, and is enhanced with corrosion inhibitors to prevent flash rusting until the piece is painted.

Ctn 4 Cs 8
Pl 5 Dr 20 Dr 35 Dr 55

1-584 View
               SDS

KOOL CUT

KOOL CUT is a specially formulated coolant for cutting tools. This product will lubricate and cool. Reduces friction in threading, drilling, tapping and reaming applications. Does not contain carbon tetrachloride or sulfur. Non- Flammable.

Dz Cs 24

7-499320
View SDS

KOOL TOOL

KOOL TOOL reduces tool temperature and helps rim friction. Prevents heat build-up in heavy material. Helps disperse cutting chips Product has no stick residue-clean up chips is fast-wipe off with rag or blow off with air hose.

Dz Cs 24

0-1983 View
                SDS
LOOP TREAT
NITRO

This liquid scale and corrosion is designed for use in either hot or cold water closed loop re-circulating systems. It features a borate/nitrate formula for superior scale and corrosion inhibition, with easy testing and control. It can be injected directly into the re-circulating system through the use of a bypass feeder, or applied by use of mild steel piping and feeding equipment.

Ctn 4 Cs 8
Pl 5 Dr 20 Dr 55

0-1984 View
                  SDS
LOOP TREAT
Poly

This liquid organic polymer-based scale and corrosion inhibitor is designed for use in either hot or cold water closed loop re-circulating systems. It features a phosphate-based formula with a polymer dispersant for anti-precipitating and sequestering harmful hard scale. It can be injected directly into the re-circulating system through the use of a bypass feeder, or applied by use of mild steel piping and feeding equipment.

Ctn 4 Cs 8
Pl 5 Dr 20 Dr 55

1-566 View
              SDS
MICRO-DRY
Dry Teflon Lubricant

MICRO-DRY PTFE Dry Lubricant & Release Agent is a no mess, non-staining dry lubricant. The low odor, colorless formula is non-oily but slicker than silicone and graphite. Excellent anti-stick properties for an effective release on die casts and injection molds. Contains an extremely fine polytetrafluoroethylene powder, creating a lubricant film effective over a wide temperature range (-100°F to 500°F). Contains no Hexane. Excellent for use on hinges, gears, metal extrusions, axles, pulleys, bushings, munitions, locks and catches, synthetic filters, machine parts, cord, twine or rope, chains, paper, glass, leather and elastomers. Use as a release agent on conveyor belts, chutes and skids, industrial blenders, bins and spray booths.

Dz Cs 24

1-L102 View
                 SDS

MOLY TUFF

MOLY TUFF is a multi-purpose, non-melt grease containing graphite for automotive, marine, industrial and agricultural applications. Forms a protective film to guard against rust and corrosion. Provides added lubrication in applications where metal meets metal. This bentone based grease is dark gray in color and is very versatile because of its stability in high temperature and extreme pressure conditions. Resists chemical breakdown from acids, salt water, dust and dirt. Will not liquefy at high temperatures and remains pumpable at low temperatures.

Cs 24 Cs 48 14.5 Oz Tubes
45# 120# 400#

1-L104 View
                  SDS

MR. GREEN

MR. GREEN is a multi-purpose, green, lithium hydroxystearate (soap) based non-melt grease for automotive, marine, industrial and agricultural applications. Organic moly additive gives high resistance to shock and impact. Forms a protective film to guard against rust and corrosion. Provides added lubrication for ball bearings, roller bearings, couplings, mechanical linkages, pumps, universal joints, ball joints, and more. Will not dry out after use as some clay based greases and remains pumpable at low temperatures.

Cs 24 Cs 48 14.5 Oz Tubes
45# 120# 400#

1-534 View
              SDS

MR. MECHANIC

MR. MECHANIC is a USDA authorized greaseless lubricant for general use. Contains a light mineral oil in a petroleum distillate base with a corrosion preventative for long lasting protection. Cleans, lubricates, penetrates and prevents rust giving four-way protection.

Dz Cs 24

1-588 View
               SDS
SURROUND
Cold Pipe
Insulation

SURROUND is a spray on coating designed to prevent condensation on cold water pipes, refrigeration lines and coils, condensers, valves and valve fittings. SURROUND insulates and prevents moisture build up on water tanks, ice machines and duct work.

Dz Cs 24

1-576 View
               SDS

NUCHAIN

NUCHAIN CHAIN & CABLE LUBRICANT WITH MOLY is a specially designed to provide maximum protection to wire ropes and chains of all types. Will completely penetrate into the strands of wire ropes providing the ultimate in lubrication. Does not build up on chains to attract dust or dirt, but provides complete lubrication of rollers, pins and bushings. Continued use of this product reduces chain whip, vibration and noise, also protects against galling, seizing and wears, thus adds life to chain cable and sprockets.

Dz Cs 24

0-927 View
               SDS

OXY TREAT

This liquid is a catalyzed oxygen scavenger that quickly removes dissolved oxygen from boiler feed water. It also provides additional protection against pitting and corrosion of internal boiler surfaces when used in conjunction with scale and corrosion inhibitors. Plus, it can be mixed with other treatment products and fed into the feed water system, or fed directly into the boiler.

Ctn 4 Cs 8
Pl 5 Dr 20 Dr 55

0-T80310
View SDS
PRECISION CONTACT CLEANER

PRECISION Contact Cleaner is a non-flammable fast drying solvent cleaner for electronic components. Because it is safe on most plastics and leaves no residue, it is effective on sensitive electronic parts. Precision Contact Cleaner is non-corrosive and has a 30,000 Volt Dielectric Strength. EPA Snap Approved and VOC Exempt.

Ctn 6 Cs 12

1-641 View
              SDS
RESTORE Rust Converter
and Protective Coating

RESTORE is a rust converter and protective coating that performs two operations at one time. First, rust is converted from iron oxide to ferrous oxide, a black organic complex. Then, a clear acrylic coating is formed. The surface can be left as is or painted over using latex or oil based paint. The coating formed by the product is sufficient to last for years without painting. Can virtually be used on all rusted surfaces. Apply this ready-to-use product with a brush or swab.

Dz Cs 4 Cs 8 PL 5

1-596 View
              SDS

REVIVE

REVIVE Rust Converter Spray is the quick and convenient way to treat rusted surfaces. This product chemically converts the rust to an inert black polymer based coating that prevents future rust from forming. Eliminates the need for brushing, sandblasting or scraping before painting rusted surfaces. Once treated, surface may be left unpainted or may be painted for improved appearance and protection. May be used on all rusted surfaces. Convenient spray can allows for quick, mess-free application. Combines a unique fast drying carrier with special rust converting agents and a strong polymeric coating.

Dz

1-569 View
              SDS

RUST RELEASE

RUST RELEASE is designed to be used on farm equipment, sports equipment, and industrial equipment. This fast penetrating product lubricates, displaces moisture, frees sticking parts, stops squeaks, stops rust and corrosion and provides long lasting protection.

Dz Cs 24

1-574 View
              SDS

SLICK

SLICK is a USDA authorized penetrating lubricant containing Teflon®. Frees frozen parts, penetrates, prevents rusting, lubricates. Quickly penetrates to free rusted parts. Teflon® continues to lubricate after application, Contains a corrosion preventative to protect metal parts.

Dz Cs 24

1-552 View
               SDS

SLIP NOT

SLIP-NOT BELT DRESSING is a USDA authorized resin based spray, designed specifically to reduce slippage of all types of power belts whether round, flat or V. Compatible with fabric, leather or rubber belts. Also helps clean and prolong life of belts.

Dz  Cs 24

 

1-541
GSA ITEM View SDS
MS 541
S.R.C.C.

SRCC is formulated to penetrate in air-conditioner coils and fins to remove all types of soils.  Upon contact with the surface of the coil, SRCC begins to react and flush soil to the surface.  It is not necessary to rinse if applied in place to a functional unit. Moisture produced will rinse product from contacted surfaces. Rinsing is required on units that have been removed for repair or cleaning.

AVAILABLE IN BULK CONCENTRATE   5-541

Dz Cs 24

1-544 View
               SDS
SUPER DRY
MOLY

SUPER DRY MOLY is a USDA authorized dry film lubricant containing molybdenum disulfide, fast drying with minimal transfer. Service temperatures range from minus 200 F to 10000 F. Ideal for those lubricating jobs when a liquid lubricant cannot be used.

Dz Cs 24

1-559 View
               SDS
SUPER GEL
STRIP

SUPER GEL STRIP is a quick, blistering action gel that clings to vertical surfaces. High solvency formula strips to original substrate. Water flushable or scraped away. Without attacking the substrates such as wood, metal, masonry, stone or ceramics. The blistered coatings can be scraped off or flushed away with water. SUPER GEL STRIP effectively removes gum from concrete.

Dz Cs 24

0-T64114 View SDS
CONVECTOR PAN SEALANT
(formerly SuperKote)

CONVECTOR PAN SEALANT is a rubberized flexible coating that is impervious to water and will seal out rust and corrosion in your condensation pans while reducing unwanted vibration and sound in your air conditioning systems. OTHER USES: Reduces squeaks and noise of ducts, metal walls, metal sinks, plastic piping, and seals tree-pruning wounds, seals electrical junction boxes from dust, water and fumes.

Dz Cs 24

1-506
GSA ITEM View SDS
SUPER ORANGE ALL

SUPER ORANGE ALL contains natural orange oil solvent to quickly cut through tar, asphalt, grease, gum, ink, decals, crayon and more. SUPER ORANGE ALL contains no petroleum distillates or alkalis. SUPER ORANGE ALL is completely biodegradable and leaves a pleasant orange fragrance during and after use.

Dz Cs 24

1-550 View
               SDS
MS 550
SUPER PEN 4
(Not Available in CA)

SUPER PEN 4 is a USDA authorized penetrant. Formulated to quickly penetrate rust, corrosion and moisture. SUPER PEN 4 lubricates, cleans and contains rust inhibitors. SUPER PEN 4 is non-flammable and non-conductive to 30,000 volts. SUPER PEN 4 has a four way action that cleans, lubricates, penetrates and prevents rust.

Dz Cs 24

1-L639 View
                 SDS

SURRENDER

SURRENDER is a gray-black non-melt lubricant formulated to withstand high temperatures and pressures. This product is actually three useful maintenance compounds in one. It is effective as an anti-seize compound in extreme temperature conditions that range from -30° F and exceed 2200° F. It can be used as an anti-friction bearing and slide lubricant. It has no known dropping point. It is effective in extreme pressure, high speed applications to 350° F and low speed, high temperature dry film lubrication to 1500° F. Can also be used as a protective coating in corrosive, high temperature applications that can reach 1000° F. It is insoluble in water. This versatile product has virtually hundreds of applications.

Dz

1-546 View
               SDS
SURRENDER EF ANTI-SEIZE

SURRENDER EF ANTI-SEIZE SPRAY is a USDA authorized lubricant. Contains molybdenum disulfide, graphite and aluminum in a thick grease base. Helps eliminate seizing of threaded parts. Temperature service ranges from-200 F to +20000 F. Helps cool bearings. Does not contain any chlorinated or fluorinated solvents.

Dz Cs 24

0-630 View
               SDS

TOWER-CIDE

TOWER CIDE is a water soluble microbiological growth inhibitor. This liquid additive is used to control algae, bacteria and fungi growth in re-circulating commercial and industrial water cooling towers. It uses a non-volatile, polymer quat formula to restrict microbiological growth and keep cooling systems in top working condition. It can be applied to systems by slug addition at full concentration, or mixed at lower dilution rates for routine maintenance or customized applications. TOWER CIDE'S highly concentrated formula requires as little as 12 ppm to be effective.

Ctn 4 Cs 8
Pl 5 Dr 20 Dr 55

0-1933 View
                  SDS
TOWER
TREAT H

TOWER TREAT H is a scale and corrosion inhibitor is specifically formulated for open re-circulating cooling tower systems in areas of high hardness and high alkalinity scaling waters, it also contains an additional polymer designed to help inhibit scale and deposition in a wide variety of aqueous systems. This product can be used with an automated continuous feed system.

Ctn 4 Cs 8
Pl 5 Dr 20 Dr 55

0-1935 View SDS
                  
TOWER
TREAT S

Ctn 4 Cs 8
Pl 5 Dr 20 Dr 55

0-135
GSA ITEM View SDS
TUNNEL TORNADO
Concentrated
Acid Replacement

TUNNEL TORNADO CONCENTRATE is a powerful yet safe multi-functional cleaner that combines the safe cleaning performance of an acid with the mildness of liquid dish soap and is safe to users and the environment. Tunnel Tornado removes Rust, Calcium (hard water scale) Soap Scum, Lime, Mold, Mildew, and Grease. Milk Stone from surfaces such as Stainless Steel, Copper, Brass, Aluminum, Concrete, Ceramic, Stone, Brick Fiberglass, Grouting, and Fabric Rust Remover. PLEASE NOTE: this product should not be used on Marble. Test on an inconspicuous spot if uncertain. Excellent for Car Wash and Vehicle use. Tunnel Tornado is BIODEGRADABLE-SAFE TO USERS AND THE ENVIRONMENT.

Cs 4 Cs 8 Pl 5
Dr 30 Dr 55

5-9355 View
                  SDS
WEATHER GUARD

WEATHER GUARD provides absolute protection for the elements. Weather Guard forms a protective dielectric seal on all electrical connections. This product keeps out water (even submerged), dust and foreign elements. Weather Guard can be applied to any surface to provide a waterproof, flexible permanent crystal clear rubber film. Once applied, the area becomes impervious to humidity, dirt, salt and fungus.

Dz Cs 24

1-579 View
                SDS
BIG RED SPRAY GREASE


BIG RED is a cured lubricant that withstands heat to 350°F, moisture, acids, high pressure and is highly rust resistant. This 50 state VOC compliant formula provides superior lubrication while forming a thick, long-lasting film to prevent future corrosion. A high pressure additive reduces wear and prolongs operational life of all machinery. Temperatures above 350°F may require periodic reapplication.

Dz  Cs 24

1-599 View
               SDS

ARCTIC GEL

ARCTIC GEL is a heat sink especially designed for brazing. Arctic Gel protects valves, controls and surrounding areas from heat damage. Simply spray on surrounding areas or completely encircle copper tubing to prevent heat transfer. Clear gel stays where sprayed then evaporates. Non-toxic, odorless, will not harm skin.

Dz

0-508 View
               SDS

DE SLIME

DE SLIME is a revolutionary combination of ingredients and deodorizers designed to clean scum, slime and other accumulations in air conditioning condensate drain lines, ice machine drain lines, water fountain drain and humidification systems.  Regular maintenance with DE SLIME will prevent overflow damage and unnecessary maintenance repairs.

Dz Cs 24

1-6600 View
                 SDS
RATTLER COIL CLEANER

RATTLER EVAPORATOR COIL CLEANER is an alkaline based coil cleaner, designed to penetrate coils and dissolve dirt and grime. Its non-fuming, professional grade formula tackles the tough tasks. No rinsing required when using on evaporator coils. For use on air conditioning split systems, mini splits, refrigeration systems, window units and electronic air cleaners.

Ctn 4  Cs 8

TOWER TREAT S is a scale and corrosion inhibitor is specifically formulated for open re-circulating cooling tower systems in areas of low hardness and low alkalinity and highly corrosive scaling waters. It also contains an additional polymer dispersant designed to insure sludge and scale are easily removed from the system through a regular bleed –off program. This product can be used with an automated continuous feed system.